-
Spalted woods. Which wood to spalt?
Which wood to spalt? Beech is by far the easiest wood to spalt well. It almost always ends up with black line and distinctly different colours. This bowl shows only one area left with the wood in its natural state. All the rest has been affected by fungi. I don’t know how many different ones. It was at the very limit of having enough structural integrity to work. Even with the gauge straight off the grinder it was difficult not to get tear out on the end grain. This wood had been left outside in all weathers for a year and a few months. It was a large tree and…
-
Origin – A Makers’ Co-operative
Origin, a maker’s co-operative in Carmarthen, is a shop I am very involved with as many of you who have “liked” my Facebook page will know. Origin is a wonderful shop and I am so pleased and proud to be part of it. And it is such a really nice bunch of people. When I first joined Origin last year I spent time looking at all the work of the other makers, trying to memorize the products to help customers. I felt humbled by the wealth of talent. And then I thought about the hours of work and the years of experience, designing, altering, developing of skills and styles that…
-
Turned Miniature Eisteddfod Chair
Having had the honour to be commissioned again to make a miniature chair for Cymdeithas Ceredigion‘s 2016 Eisteddfod I decided to put my all into making a turned miniature chair. Since turning is my main medium for working with wood it made sense to explore this method to make the chair. I’ve made chairs for Cymdeithas Ceredigion before, both a full size chair and two miniature chairs, however I used more traditional methods for these chairs. (The 2015 miniature chair, described here and here, was made out of Laburnum and the 2014 was made of Elm.) I had a prototype turned chair floating around the workshop which I’d made a…
-
A Priceless Gift
I received a priceless gift a few years ago in a tale with many twists and turns. I was commissioned to make a chair to be given as a prize at a local Eisteddfod. Cymdeithas Ceredigion had been bequeathed money and the Cadair Goffa Pat Neill (Pat Neill memorial chair) was to be given for a poem in “cynghanedd” which is strict metre. (I’m afraid my knowledge of the complexities of poetry in any language is beyond me. The basics of Shakespeare’s iambic pentameter is the limit of my knowledge.) Working with wood, however, is another matter. And what an honour to be commissioned to make this chair. I immediately…
-
Eisteddfod Chair
For several years now I have had the honour to be commissioned to make a chair for a local Eisteddfod. This is the first of the miniature chairs I made and the wood chosen was Elm. An eisteddfod is a cultural festival, a celebration of the arts and with competitions in all sorts of arts from poetry, literature, music, dance, performance… The original eisteddfod happened in 1176 in Cardigan only a few miles from me. It was held by Lord Rhys of Deheubarth at his castle. Major work has been happening there for a few years now, both archaeological and restorative, since Cardigan castle came into public ownership. (There is…
-
Tale of an Ash Tree
My work often comes from trees where I know some of the story behind the wood. None more so than one particular Ash tree. There are so many different threads of different stories that I see when I look at a piece from this tree. Once upon a time an Ash seed rooted itself in just the wrong place, on a river bank where there was almost no soil and under a cliff so there was almost no sun either. For a hundred and fifty years and more the Ash tree grew tall and thin as she stretched to reach more light, developing a buttress on one side to hold…
-
Marketing Woodturning
I have been woodturning for ten years now. In fact I even did a little before that, about fifteen years ago. However, most of this time I have also been a carer so not only was my time limited but also I never knew if I would have to drop everything else for a while if the person I was looking after needed more help. I therefore deliberately kept a low profile with the woodturning. I put my work into local shops and galleries and left them to sell on my behalf. I am grateful for this service. I do not begrudge shops their commission, I am a firm believer…
-
Cadair Cymdeithas Ceredigion
Cymdeithas Ceredigion has honoured me over the last three years by asking me to make a chair to be awarded as a prize in their Eisteddfod. The first year was for a full sized chair. Last year and this year I was asked to make a miniature chair. This is the chair I made this year and a brief description which went with it along with the translation. Tresi Aur Ond ai dyna’r enw? Beth am Feillion Sbaen, Coed Sbaen, Bedwen Sbaen? Mae’r enwau ‘na i gyd wedi dod o ardal De Ceredigion. Chwedl glywais i oedd i’r pren ddod i mewn i Aberaeron yn y 1860au fel “balast” mewn…
-
My Big Lathe
This is my favourite lathe and was in fact the first lathe that I bought though I didn’t use it straight away. I can turn up to 24″ diameter on this lathe. I love the history associated with this lathe. It started life as a metal spinning lathe – something I’d never even heard of when I first had the lathe. It was in a poor state and I had to derust then paint it. There was no tool rest and when I was asking Huw to make one for me I really didn’t know what I needed. This tool rest can be moved at a couple of different points…
-
Anniversary Bowls
My anniversary bowls have devoloped from a mistake I made when I was inexperienced which I mentioned it in my blog on learning through experience. I have made many special birthday or wedding anniversary bowls with a coin in the base. I have made at least three bowls for people celebrating their 100th birthday. For two of these I was able to get the wood for the bowls from the farms where the women were brought up. So the bowl was truly personal to them. They would probably have played in the tree from which the bowl was made. I remember being told afterwards that someone went to see one…