wood turning

  • Lathes and machines,  wood craft,  wood turning

    Viceroy Short-bed Lathe

    This Viceroy short bed lathe is a wonderful lathe. I can turn up to 16″ over the bed and if I wanted and needed I could also turn larger pieces on the outside. However since I have another, larger lathe I’ve never set this up for outboard turning. This lathe has been converted to variable speed running from zero to about 1400 rpm. This is great as the belts for the different speeds are harder to change on this lathe than my little Scheppach. So I have an inverter mounted on the wall and a three phase motor. There was a three phase originally on the lathe but unfortunately not…

  • wood craft,  wood turning

    The Smallest Lathe

    This is a Scheppach (dmt450) 5 speed bench mounted wood turning lathe. This lathe was the first lathe I used seriously. And I did use it seriously considering it was a small inexpensive lathe. It was bolted well to the bench and within months I was turning bowls up to the maximum diameter of 10″ (150mm). And these weren’t always round bowls either. I had already been making furniture for several years so I knew how much I liked the natural edge and the beauty of the wood in its fullness, not cut into a straight line for my ease of use. I was very impressed with this lathe. It…

  • About Wales,  wood craft,  wood turning

    Commissions 2

    Commissions come in all shapes and sizes. I enjoy the challenge of making replacement turnings for people. Most of my work is free form – I can choose what shape I want. Bowls, pots, vases, tea light holders. they are all things that give me the chance to look at a piece of wood and make the best I can from that particular piece of wood. If there is a rotten bit in the wood I can change the shape, it doesn’t matter. So it is good having the occasional challenge of turning something exactly like another piece. Since  the original was turned by someone else there is also the…

  • wood craft,  wood turning

    Anniversary Bowls

    My anniversary bowls have devoloped from a mistake I made when I was inexperienced which I mentioned it in my blog on learning through experience. I have made many special birthday or wedding anniversary bowls with a coin in the base. I have made at least three bowls for people celebrating their 100th birthday. For two of these I was able to get the wood for the bowls from the farms where the women were brought up. So the bowl was truly personal to them. They would probably have played in the tree from which the bowl was made. I remember being told afterwards that someone went to see one…

  • Background to wood and its history,  wood craft,  wood turning

    Commissions 1

    Commissions offer a different challenge to my everyday work. I love to have different commissions. Sometimes I am given commissions to turn bowls from wood that someone’s home and that is always a pleasure as it has so much personal meaning to the people involved. Wood always has a history but if that history is linked to the people who are able to keep the wood and possibly even pass it down through the generations that is so special. It is also through being given commissions to turn something from people’s own wood that I have come across some of the most beautiful wood I have had the pleasure to…

  • wood craft,  wood turning

    Ornamental Bowls.

    Ornamental bowls show the individual character of each piece of wood. Ornamental bowls are a delight to turn and they can be turned from fresh (green) wood or seasoned wood. They offer the widest scope in showing the wood to its greatest advantage. Many ornamental bowls can easily be used as fruit bowls or trinket bowls. Each ornamental bowl is different even when using the same wood. Each species of tree, each part of the tree, whether branch, trunk, root or crotch wood (where the trunk branches out), all have different characteristics, different figuring – and different problems. I use only local wood. The furthest I have fetched a tree…

  • wood craft,  wood turning

    Wood Finish 2. Oil.

    Which wood finish to chose is the most difficult aspect of wood turning, in my opinion. Oil, however, is the natural choice for a food safe wood finish. But which oil? Robin Wood, an experienced wood turner I would instinctively trust, is totally in favour of Linseed oil (Flaxseed oil) which can be bought for culinary use. However, other people say that it isn’t an ideal wood finish. I used it on the inside of a corner cupboard I made years ago and the smell lingered for years. I definitely wouldn’t use it for within an enclosed space again. Some say Jojoba is ideal as it is actually a liquid…

  • Background to wood and its history,  wood craft,  wood turning

    My Milling Band Saw

    I have two different types of saws that I use for converting tree trunks into planks, a milling attachment for a powerful chainsaw and this large band saw. Hopefully I shall make some videos in the future showing them working. For very large trunks, or if they are somewhere other than home I use the milling chainsaw which I’ll describe in another blog. If the wood is small enough and at home I have the band-saw. This was originally designed for sawing metal but has been adapted now to saw wood. Most milling band-saws do the moving through the wood and are portable, which has its advantages. With this one…

  • wood turning

    Lathe Safety

    As someone who has worked on lathes for many years thinking about lathe safety is second nature to me. I know I’ll be off work for a long time with a broken finger and I’d never be so good with only one eye. Also, I heard of a young woman who was killed when her hair got caught in a lathe. You can read the full story here . It was interesting introducing the lathe safety to someone and verbalising what I instinctively practice. So, when I was showing Phil how to turn his first bowls I made sure that he was aware of the basic lathe safety rules. For anyone…

  • wood turning

    Wood Turning -My First Experience

    Guest Blog I had a happy few days visiting Roni a couple of weeks ago in beautiful West Wales. We have been friends for years. Rather rashly, she offered to show me wood turning and so how to make a bowl. I say rashly because I am not a practical sort of person. DIY is a form of torture to me and making something from scratch is a concept I have never understood, let alone embraced! The first thing that Roni said was that lathe safety is paramount when wood turning. The lathe turns the blank at a 800 revolutions per minute (0r more!) and the wood is taken off…